Round NetJuggler Fire Fans

Item sold in pairs. The Kevlar wicks are not included with the pair of fans.

Because of its geometric shapes, this pair of fans stands out from other pairs that we are used to handling.

The Fire Fans:

Fire fans allow you to manipulate flames and impress your audience without necessarily having a lot of juggling abilities. The visual effect is striking.

To facilitate the grip, you have a large handle with a notch so that your hand holds the fans well, very practical for manipulation. You also have a very small round handle on top of it. This is ideal for slipping a finger in and rotating the fans at full speed!

The pair is quite heavy (around 1.2kg per pair). When set in motion, each rotation takes on a rather impressive magnitude. If you spin it at the tip of your finger, you will have the impression of having a real ring of fire rotating at the tips of your hands. Beware, if you have a small stature, this pair can quickly tire you.

Although this model is one of the most robust that we have on our website, to give it an optimal lifespan, we recommend that you transport it in a flat box with a cloth to protect the fans or in a cover.

A modular system:

Kevlar wicks are not included with this pair of fans. You can put up to 5 wicks at the same time per fan. In which case, you will have ten flames dancing all around you. But, nothing prevents you from putting only four, three, two or even one according to your needs and desires.

The notches where the kevlar is fixed are 7cm long, so you can attach 25mm, 50mm or 70mm wick to them.

Small safety tip: if fire scares you, don't lower your arms, rather think about raising them by spreading them while turning on yourself. The effect is pretty and will divert your audience's attention while the flames are away from you and you cool down quietly! Take care of yourself and of your audience. Good fire juggling !

Technical characteristics:

Weight: 610g per unit, 1.2kg per pair.
Length: 57cm.
Height: 38cm.
Diameter large handle: 10cm, 8cm with the notch.
Hole diameter: 3cm.
5 notches 7cm long for the Kevlar wicks.

How to attach the Kevlar?

You can put 25mm, 50mm or 70mm Kevlar in the pair of fans. To fix the Kevlar on the pair of fans, you will have to sew it so that it stays in place. To keep the seams from burning, use Kevlar string!

The other solution would be to screw each wick with a screw or use rivets.

With fire fans, you have to pay attention to the heat released when lighting. Also pay attention to the direction of the wind before you start the show.

NetJuggler recommends wearing Kevlar gloves, they have an excellent role in protecting against heat and flames. If you do not opt for Kevlar gloves for aesthetic reasons, be sure that your gloves are not made of synthetic material, because the risk of burning yourself is real.

What kind of use ?

Fire equipment is aimed towards professionals! Fire burns...

However, fire fans are ideal for starting the discipline.

Warning: this item may be dangerous. Always handle a burning object with care and provide something to extinguish it (wet non-flammable cloth reserved for this purpose). This item is prohibited for people under 18.