Staff Contact Fusion Fire and LED Kit Threeworlds

This kit, sold individually, includes a single central element (available in aluminum or carbon fiber ), two Sushi fire tips, two LED tips with Prism heads, O-rings, and a double charging cable. It allows you to assemble a 1.50m contact staff in either fire or LED configuration . This kit does not contain two staffs: both sets of tips use the same central element. Silicone flowers are not included.

Staff Contact Fusion Fire and LED Threeworlds Kit:

The Threeworlds Fusion Fire and LED Staff Contact Kit allows you to switch between a light and a fire configuration on the same staff contact. Choose your central element in aluminum or carbon fiber, then install the set of end caps suited to your session.

To use LED lights, use the two light tips equipped with rechargeable Lumi modules and silicone Prism heads. To switch to fire lights, remove these tips and replace them with the two Sushi fire tips. In both configurations, the staff measures 1.50 m .

One central element, two configurations: all four end pieces are provided, but only two are mounted at a time. To have two staffs usable simultaneously, a second central element would be required, which is not included in this kit.

NetJuggler's review of the Staff Contact Fusion Fire and LED Kit:

The advantage of this kit is that it retains the same central element and gripping features when switching from illuminated to tinned mode. The Fusion system facilitates the replacement of the end pieces and disassembly for transport.

The F-Grip natural rubber grip provides a secure surface for contact movements. Compression fittings hold the bits firmly, while O-rings minimize contact between metal parts and reduce noise at the joints.

The choice of carbon fiber makes the overall weight lighter compared to aluminum. However, the feel may differ between the light and LED configurations, as the two sets of end caps have different constructions and not necessarily the same weight distribution.

For what type of practice?

• Staff contact: rolling on the arms, torso and back, transitions and body sequences.
• Manipulation and rotations in a lighted configuration.
• Practitioners wishing to alternate between LED and fire with the same central element.
• Fire configuration reserved for people who have mastered their staff and the precautions specific to handling fire.

To choose the right length for a contact staff, Threeworlds recommends a model that reaches between the middle of your torso and your chin when placed vertically on the ground. Make sure that a length of 1.50 m suits your height and training habits.

Optional complementary products:

Discover the elements and configurations of the Fusion Threeworlds staff range , as well as our selection of Threeworlds lighting equipment .

To replace the supplied accessories if necessary, find the O-Rings for the Fusion fittings and the Lumi Pro dual power cable .

How to switch from LED staff to fire staff?

• Turn off both Lumi modules.
• Loosen the fittings by turning the LED tips in the unlocking direction, then remove them.
• Install the two fire tips onto the connectors of the same central element.
• Push each end in until a tight fit is achieved, then twist to lock the fitting by compression.
• Check that both ends are secure before practicing.

To return to the LED configuration, follow the same procedure after allowing the fire tips to cool completely. Store unused tips away from your practice area.

Using and recharging Lumi modules:

• Two quick presses will turn on the module.
• Pressing the button allows you to switch to the next mode.
• A prolonged press will turn it off.
• Pressing the button when the module is off displays the battery level.
• Four brightness levels allow you to adjust the lighting.
• The Juggle and Spin groups offer slower and faster patterns respectively.
• The startup can be configured to the first mode or the last mode used.

Remove the Prism heads to access the USB-C ports, then connect both modules using the included dual charging cable. The red light indicates charging is in progress; the green light indicates that charging is complete.

Precautions for fire setup : Practice without flames before any use with flames. Practice in a clear, suitable area, away from the public and flammable materials, with a person capable of intervening and an appropriate extinguishing device. Check the connections before each session and allow the fittings to cool completely before disassembling them. Never place a burning staff on the ground.

Protection of light elements : LED tips must never be ignited, exposed to a flame, or come into contact with combustible materials. Keep them away from flames when using the staff in a fire configuration.