Dragon Kit for Staff - Gora

The kit includes a pair ( 2 adapters and 8 drill bits ). Enough to equip both sides of a staff.

Dragon rainbow adapter for staff:

With this kit, you will be able to transform a normal fire staff into a Dragon fire staff . The material is easy to use, the only condition for installing it on your staff is that the diameter of your staff is compatible with this kit (22mm).

This system has the particularity of adapting to any staff whose tube diameter measures 22mm. For any tube whose diameter is less than 22mm, you will need to increase its diameter using tape (adhesive tape) not provided (aluminum adhesive tape recommended). You can also use strong adhesive tape under the adapter to protect the surface of your staff, especially if you have a silicone staff covering.

How to transform a staff into a Dragon staff?

Don't overtighten the mounting screws; the crossbar just needs to be tight so that it doesn't rotate around the staff tube. If you tighten them too tightly, there's a risk of damaging your staff and its silicone grip. There's even a risk that the screws will bend when the staff falls if you overtighten them.

The rods on which the bits are assembled are made of 7075 Space Tech aluminum alloy, which allows for an 8 mm diameter for the cross without sacrificing stability or impact resistance.

Tips on placing the stems:

For training sessions, insert the rods by hand, but for use with fire it is recommended to tighten them with an Allen key, to avoid losing them at high rotation speeds.

If the surface of the rods is damaged, they can get stuck in the adapter, permanently connecting them, so take care, do not damage the connective areas.

NetJuggler's opinion on this Dragon kit:

As you can see, this kit makes it easy to transform a normal fire staff into a Dragon fire staff. This type of equipment will need some pampering, however. Be careful during assembly and disassembly; we recommend standing over a container; it's easy to lose small items such as screws and springs. We sell a kit with screws and springs for those like me who are going to be putting a few pieces together. We also sell the rods separately, equipped with drill bits if needed.

Using the Dragon Gora kit with a Flowbonacci tube:

This Dragon Gora kit has not been specifically designed to work with Flowbonacci brand carbon tubes. However, joint use is possible if certain precautions are observed.

• If you are careful with your equipment, it is entirely possible to obtain a high-performance fire staff by combining this kit with a Flowbonacci carbon tube (not included with the kit).
• Caution: Improper handling or prolonged exposure to heat may damage the carbon tube, especially in the event of direct contact with flames.
• The manufacturer Flowbonacci does not guarantee its tubes when used with a fire kit.
• It is recommended to add silicone tape (not included) to the part of the Flowbonacci tube without grip to create a thermal barrier between the carbon and the kit adapter. This helps reduce the impact of flames and direct heat.
• However, residual heat may be transmitted through the metal hub. It is therefore necessary to check its temperature before restarting a session.
• Helpful tip: If you can touch the hub with your fingers without burning yourself, you can repeat the fire session. Otherwise, wait until the staff has completely cooled.

In summary, this kit can be mounted on a Flowbonacci tube provided you understand the compatibility limits and take all necessary precautions to protect your equipment.