Prism LED tip for Contact Fusion staff Threeworlds
LED Prism tip sold individually , with its rechargeable Lumi light module and silicone Prism head. Two tips are required to equip a full staff. Central element, O-ring seal, and charging cable sold separately.
Prism LED tip for Contact Fusion Threeworlds staff:
The Threeworlds Contact Fusion LED Prism end cap is a complete 55cm end cap designed for building or repairing a Fusion contact lighting system. It includes a hybrid aluminum and polycarbonate tube, a section covered with F-Grip grip, a rechargeable Lumi light module, and a silicone Prism head.
The aluminum section provides rigidity near the connection with the central element. The polycarbonate section diffuses the light from the Lumi module located at the tip. This same module also illuminates the Prism head: the tube and the silicone tip light up together.
Combined with a 40cm Fusion central element, two 55cm end pieces allow for the creation of a 1.50m staff . They are mounted on Contact Fusion central elements in aluminum or carbon.
NetJuggler's review of the Prism Fusion LED tip:
Individual sales allow you to replace a single end or create a light fixture from a compatible Fusion central element. The hybrid construction combines the rigidity of aluminum with the light diffusion of polycarbonate.
The F-Grip grip extends the staff's contact surface, while the Prism head adds a luminous volume to its tip. Weighing approximately 290g per tip, this configuration adds weight to both ends of the staff: a factor to consider depending on your handling preferences.
For a symmetrical setup, you will need two identical nozzles. Also, remember that connecting gaskets and a charging cable are not included with this item.
Technical specifications:
- Length: 55 cm.
- Mass: approximately 290 g.
- Structure: aluminum and polycarbonate.
- Outer diameter of the tube: 22 mm.
- Diameter on the part covered with grip: approximately 25 mm.
- Natural rubber F-Grip grip.
- Prism head in silicone with prismatic relief.
- Rechargeable Lumi light module included.
- Recharges via USB-C port.
- Four brightness levels.
- Juggle and Spin light pattern groups.
- Compatibility: Contact Fusion Threeworlds central elements in aluminum or carbon.
- Attachment to the Fusion connector via compression locking.
- O-ring seal and charging cable not included.
For what type of practice?
- Composition of a Fusion luminous contact staff.
- Replacement of one end on a Contact LED Fusion Prism staff.
- Bearings on the arms, torso and back, once the tip is mounted on a full staff.
- Rotations, manipulation and lighting performance.
Information about the manufacturer Threeworlds:
Threeworlds is an Australian brand based in Burleigh Heads. It develops the Fusion, Lumi, and Prism ranges for handling and flow. The Fusion system uses interchangeable parts and compression fittings to facilitate disassembly, transport, and configuration changes.
Optional complementary products:
If your central element doesn't have an O-ring, use one for the Fusion fitting . This seal reduces contact between the metal parts and minimizes noise at the joint.
The Lumi Pro dual power cable allows both modules of a staff to be charged simultaneously.
Also check out our selection of Threeworlds lighting equipment .
Lumi module controls and charging:
- Two quick presses will turn on the module.
- Pressing the button allows you to switch to the next mode.
- A prolonged press will turn it off.
- Pressing the button when the module is off displays the battery level.
- Four brightness levels allow you to adjust the lighting.
- The Juggle group offers slower patterns; the Spin group offers faster patterns.
- The startup can be configured to the first mode or the last mode used.
Remove the Prism head to access the module's USB-C port. The red LED indicates charging is in progress; the green LED indicates charging is complete. The charging cable is sold separately.
Precautions for use : Check that each connection is tight before use. Avoid strong impacts to the light tube and the electronic module. This LED tip must not be ignited or exposed to a flame.
How do I install the nozzle onto the Fusion central element?
Push the fitting onto the connector of the central element, passing over the O-ring, until a snug fit is achieved. Then turn to tighten: the mechanism expands a rubber piece inside the tube and holds the assembly in place by compression.
To remove the tip, turn it in the opposite direction to release the lock, then remove it from the connector.
People who bought this item also bought the following items
Central handle for Contact Fusion Threeworlds staff
Threeworlds Fusion center handle: 280g in aluminum or 225g in carbon. Length 40cm with F-Grip grip. Requires two compatible Fusion end caps.
ECHO glowing staff
USB rechargeable staff. Several light modes equipped with an LED block at each end.
Staff Contact LED Fusion Prism Threeworlds
150cm Fusion Prism illuminated staff for contact: F-Grip grip, rechargeable Lumi modules and choice of aluminum or carbon. O-rings and dual USB-C cable included.
Echo Trace Dismountable Staff
This glowing staff can be disassembled into three parts. Ideal to carry it everywhere with you!
Staff Contact Fusion Fire and LED Kit Threeworlds
Upgrade from LED to fire with this Threeworlds Fusion kit. Includes a central element, interchangeable end caps, decorative seals, and a dual USB-C cable.
Sushi fire nozzle for staff. Contact Fusion Threeworlds
Remplacez une extrémité de votre staff Contact Fusion avec cet embout feu Sushi Threeworlds de 55 cm. Vendu à l’unité, avec grip F-Grip et mèche Kevlar Sushi.
e