Threeworlds Fire Hula Hoop Wick

Wick sold individually – hoop not included. Compatible with 20mm diameter hula hoops .

Threeworlds Fire Hula Hoop Wick:

Easily transform a compatible hula hoop into a fire hula hoop with this Threeworlds removable drill bit . Its quick-release system allows for easy installation. and remove it in seconds, without any tools . A particularly effective solution. practical for keeping the same hoop and equipping it with wicks when you want to practice with fire.

The 4 cm wide para-aramid (Kevlar) fiber wick is mounted on a Flexible stainless steel cable. Once installed, the flame is approximately 8 cm from the hoop . The whole thing remains compact and light with a mass of about 40 g per strand.

This version is designed for hoops with a diameter of 20 mm . Since the fixing diameter is not adjustable, please check the diameter of your hula hoop before ordering. To achieve a balanced set, Threeworlds generally recommends using 4 to 6 strands evenly distributed around the hoop.

NetJuggler's review of the Threeworlds Fire Hula Hoop Wick:

The main advantage of this drill bit is its tool-free fastening system . It allows for a quick switch from a classic hoop to a configuration equipped with drill bits. then remove them after use. This is particularly useful for transport: The wicks can be removed to keep the hoop much less bulky. The stainless steel cable provides flexibility to the assembly and helps to absorb shocks. Weighing only 40g per wick, the system also avoids adding unnecessarily heavy hardware to the hoop.

For what type of practice?

• Reserved for practitioners experienced in handling flaming equipment.
• Allows you to quickly transform a compatible hula hoop into a fire hoop.
• Suitable for shows, artistic performances and advanced training.
• The removable assembly makes transport easier and allows you to quickly find a hoop without strands.
• For good balance, distribute the strands evenly around the hoop.

Which hoops should I use with this Threeworlds drill bit?

The photos on this page were taken with our decorated hula hoop . This wick is also compatible with our hula hoop 20 mm . In all cases, check that the hoop tube has a diameter of 20 mm . because the fixing system for this drill bit is not adjustable.

Optional complementary products:

To assemble your equipment, you can combine several drill bits with one decorated hoop, 20 mm or to our 20mm hula hoop . You can also discover our selection of hula hoops and fire hoops .

Warning : practicing fire hula hooping presents significant risks of burns and fire. This equipment is reserved for experienced adults who have already mastered their hoop without fire. Before each use, carefully check the drill bit, cable and fastening system. Check that each wick is properly locked onto the hoop before lighting it. Use this equipment only in a suitable, clear, and safe environment, with the following equipment: necessary to extinguish a small fire.