677

Kevlar Juggling Wick, 70mm Wide - Play Juggling

Kevlar® 70mm / 3mm70mm/3mm KevlarKevlar 70mm70mm/3mm Kevlar70mm/3mm Kevlar
Voir plus de photosCacher les photosVoir toutes les photos
PRICE
900
810
Qty
This item is currently out of stock. We cannot guarantee delivery times if you purchase this item today.
24h point relaisColissimo with tracking 48h
Shipping costs for delivery in :

The price shown is for one meter . To purchase a length of several meters, simply enter the number 3 in the Qty box next to the "Add to Cart" button (for example, 3 meters).

Kevlar wick:

To create your own juggling equipment or to replace the wicks on your fire equipment, you'll need wick. The length you'll need will vary depending on your project. Wick widths between 50mm and 70mm are primarily used for torches and fire staffs.

It is up to you to define what you will adapt to your fire equipment.

Kevlar Play Juggling:

Kevlar from the Italian brand Play. It is renowned worldwide among the fire juggling community. It has a reputation for being one of the purest and most absorbent.

Wick characteristics:

  • European-made Kevlar wick.
  • Standard model: 70mm.
  • Thickness: 3mm.
  • Weight per meter: 85g.

NetJuggler Information:

Our wick is assembled in Europe and meets high-quality standards. It is a polymer made up of aromatic (benzene) rings separated by amide groups. It belongs to the aramid fiber group. Poly-para-phenylene terephthalamide was discovered and marketed under the registered trademark Kevlar.

Poly-para-phenylene terephthalamide was discovered in 1965 by Stephanie Kwolek, a researcher at DuPont. The company chose to name this polymer Kevlar. It wasn't until 1971 that the first factory was built and produced the first kilograms of Kevlar.

To optimize the lifespan of your wicks, NetJuggler recommends using odorless petroleum jelly, which you can easily find in most supermarkets.

Some interesting characteristics of Kevlar:

  • Excellent resistance to shocks and fatigue.
  • Good chemical behavior with respect to fuels.
  • Significant moisture reabsorption (4%) during steaming prior to impregnation.
  • Fire resistance (decomposition at 400°C).

Kevlar usage guidelines:

There are several ways to attach your wick to your fire equipment. If you are located near our store, feel free to come and see us; we will be happy to assemble the wick and adapt it to your equipment free of charge, whether you bought it from us, elsewhere, or even if you designed it yourself.

For what type of practice?

Fire safety equipment is intended for experienced and professional users! Fire burns...

Warning: This item can be dangerous. Always handle a burning object with care and have a way to extinguish it (a damp, non-flammable cloth reserved for this purpose). This item is prohibited for persons under 18 years of age.

People who bought this item also bought the following items

Kevlar® 50mm / 3mm
650
585

Kevlar® 50mm / 3mm

European manufacturing.
Standard: 50mm.
Thickness: 3mm

Kevlar® 100mm / 3mm
1150
1035

Kevlar® 100mm / 3mm

European manufacturing.
Very wide: 100mm.
Thickness: 3mm

Thin Kevlar® thread
590
531

Thin Kevlar® thread

European-made Kevlar thread. 30m reel.

Kevlar® 25mm / 3mm
450
405

Kevlar® 25mm / 3mm

European manufacturing.
Model: 25mm.
Thickness: 3mm

Hands of Fire Gora
4800
4560

Hands of Fire Gora

Hand candles. Thick leather protection. Sold in pairs.

XL 70mm fire balls
3400
3060

XL 70mm fire balls

70mm wide wick. For large flames that last longer.

Comment / Question

  1. Answer
    Fixing

    Any hints on the different mounting methods for those who live far away? ;)

    04/08/2021
    • Answer
      Re: Fixing

      I just made a short amateur video explaining how to change your wicks. The example given here is a 70mm wide Kevlar wick. 50cm was used to equip the torch in the video.

      04/08/2021
    • Answer
      Re: Fixing

      THANKS!

      05/08/2021
  2. Answer
    Duration to effectively soak bolas and spitting torches

    Hello enthusiasts!

    My question is, how long do you recommend soaking your Kevlar in Kerdan so that your equipment stays lit for 2 minutes/2.5 minutes, knowing that mine are almost new?

    Thanks in advance ;)

    Happy Sunday

    28/01/2018
    • Answer
      Re: How long to effectively soak bolas and spitting torches

      Soaking time has no effect on the burning time. And I don't recommend partially soaking your wicks, as this may shorten their lifespan.

      Ideally, you should use a fire blanket to extinguish the equipment if it has a burning time that is too long compared to the duration of your sequence. Simply fold the blanket over the still-burning equipment to smother the flame.

      Be careful, however, as some fire blankets can catch fire once they become worn and unstitched. Remember to replace them before they show signs of wear.

      29/01/2018
  3. Answer
    Making flaming arrows...

    Hello, I am part of an archery club (contemporary, not medieval), and we have a project to shoot fire arrows, for example to set fire to the bonfires of Saint John. A member of a fire juggling group told me about Kevlar. How to proceed with your product (in particular: how to mount the Kevlar fuse on the arrow, knowing that we will consider it as "lost" since it will burn with the target) Thanks in advance!

    29/11/2017
    • Answer
      Re: Making flaming arrows...

      I invite you to contact us by phone, we can discuss your project more fully than by exchanging messages here :-)

      30/11/2017
  4. Answer
    Fiery Time

    Good morning

    I'm doing some testing for an upcoming show and I'd like to know how long a wick can burn?

    Does its duration depend on its size (thickness/number of turns) and/or its soaking time in the kerdanne?

    I would like my wick to burn for at least 1 hour 30 minutes.

    THANKS

    26/03/2017
    • Answer
      Re: Flaming Time

      The ignition time depends on the thickness and size of the wick because it corresponds to the combustion time of the fuel used. On the other hand, for an ignition time of 1h30, Kevlar will not be suitable because it will have to be extinguished to soak it again before relighting it. For 1h30 of ignition, you should perhaps turn to a company specialized in pyrotechnics who will be able to advise you better than us. I imagine that the use of the equipment will not be for juggling :-)

      27/03/2017
    • Answer
      D:

      Hello, the previous message talks about letting the wick burn for 1 hour 30 minutes, but is this possible if the wick is constantly moistened with kerdane, for example, a pump that brings the oil to the base of the wick?

      12/04/2020
    • Answer
      Re: Flaming Time

      Do not carry out this type of assembly without consulting professionals in pyrotechnics.

      30/04/2020
  5. Answer
    fire

    Is it good for my bolas? http://www.castorama.fr/store/Petrole-desaromatise-1L-prod12260235.html?navCount=0

    05/01/2015
    • Answer
      Re: feuuu

      Yes indeed, it is the right product to soak your locks in.

      06/01/2015
  6. Answer
    [KEV_NETJ_70]change of wick

    Good morning,

    I would like to change my staff bits but I don't know how to go about removing them from my stick. There are some sort of screws (two on each side of each bit) with a circular hole in the middle.

    could you help me?

    01/02/2014
  7. Answer
    [KEV_NETJ_70]Problem

    I accidentally replaced the aromatized petroleum jelly with painter's detergent. Can you tell me how to clean them (how can I get them back to the way they were before my mistake?

    29/10/2013
    • Answer
      [KEV_NETJ_70]Re: [KEV_NETJ_70]Problem

      That's a shame! Honestly, I've done a lot of stupid things with my fire equipment, but not that one! I don't know how you can fix that. I'll try to find out.

      29/10/2013
  8. Answer
    [KEV_NETJ_70]Lifespan of a Kevlar wick for torches

    Hello, I am planning to buy some torches and I would like to know approximately how long a Kevlar wick will last if I use them every day.

    THANKS

    29/08/2013
    • Answer
      [KEV_NETJ_70]Re: [KEV_NETJ_70]Lifespan of a Kevlar wick for torches

      According to Mjchael, you should definitely not use your torches every day, but rather every night, otherwise it's useless! :-) According to Etienne, if you extinguish your torches properly before they go out on their own (this allows only the fuel to burn and avoids burning the wick itself), you will have a lifespan of between 3 and 6 months. After that, the quality of Kevlar is important. The Kevlar we sell here is a high-end Kevlar without polymers: 100% Kevlar, which is quite rare on the market. And the "braiding" is dense. This will give you a bigger flame because it allows for a larger fuel reservoir. But it will also give your wicks a longer lifespan. Happy juggling and be careful, fire burns :-).

      29/08/2013
    • Answer
      [KEV_NETJ_70]Re: [KEV_NETJ_70]Lifespan of a Kevlar wick for torches

      Thank you for this very satisfactory response.

      29/08/2013
  9. Answer
    [KEV_NETJ_70]thickness of the wick

    It's all in the title, I wonder what thickness of wick you offer?

    1.6mm, 2.5mm, 3.2mm?

    Thank you !

    31/03/2011
    • Answer
      [KEV_NETJ_70]Re: [KEV_NETJ_70]thickness of the wick

      It is just over 2mm thick.

      02/04/2011
  10. Answer
    [KEV_NETJ_70]Fire Lifespan

    I've been using bolas for a while now and I have the distinct impression that the burning time is getting shorter... either I've used up its lifespan or I have a problem with time perception! ^^ Is there a particular way or an average lifespan to know if the Kevlar is no longer effective?

    10/11/2009
    • Answer
      [KEV_NETJ_70]Re: [KEV_NETJ_70]Fire Lifespan

      If the burning time is no longer as long as when you bought your bolas, then it's normal, they wear out...

      There could be several reasons: If you used a product other than Kerdane or dearomatized petroleum (same thing).

      It's possible that you've been using them for a long time or very intensively...

      If you find that the ignition time is really no longer satisfactory, then you can change it, we sell Kevlar by the meter. On a basic model, there is about 50cm per head, and for the width, you can opt for 50mm or 70mm it depends on how your bolas are made.

      If you have any specific questions about the Kevlar assembly on your balls, don't hesitate to ask. You can ask here or call me at 05 55 56 25 79. I'll do my best to explain.

      11/11/2009
    • Answer
      [KEV_NETJ_70]Re: [KEV_NETJ_70]Fire Lifespan

      Thank you very much, the answer is more than satisfactory! :)

      And I'm currently also looking for a staff, but I haven't seen any on your site. Did I look correctly or did I miss them?

      11/11/2009
  11. Answer
    [KEV_NETJ_70]kevlar in Dakar?

    Hello. I've been living in Dakar for 2 years and I'm looking for Kevlar to make my bolas. In what kind of store can I find it? Do you have any tips because I can't find any at the moment! Thanks in advance! Kind regards, Elsa

    08/10/2009
    • Answer
      [KEV_NETJ_70]Re: [KEV_NETJ_70]kevlar in Dakar?

      You can find it in juggling stores... But in Dakar, I admit I don't know how to advise you. Send me an email with the lengths you need and a delivery address, and I'll tell you the shipping costs to send it to your home in Dakar. The email: at the top of the site :-)

      08/10/2009
Log InEnglish