Aerial hoop wick

Detail of the silver metal aerial hoop support with circular ring and tightening screw.

Close-up of the attachment of an aerial hoop showing a metal rod and a natural rope wrapped around a rope-covered core.

Aerial hoop wick: silver metal rod with beige fabric-wrapped head and visible screws, held by one hand.

Thick beige natural rope wick wrapped around a grey metal tube, close-up view.

Aerial hoop wick – upper section of a black hoop with metal rods and small beige balls at their ends.

Voir plus de photosCacher les photosVoir toutes les photos

Item sold individually. Aerial hoop not included. This fuse is intended for experienced fire performers.

Aerial Hoop Wick:

This wick for aerial hoops transforms a classic aerial hoop into a spectacular fire apparatus. Designed to be attached to the top of the hoop, it keeps the flame approximately 30 cm away from the tube, creating an impressive visual effect while limiting heat transfer to the apparatus.

Originally developed for aerial hoops , this attachment is compatible with all tubes with a diameter between 15 and 25 mm . It can therefore be used to equip other tubular structures adapted to fire performance.

The fixing is designed to remain permanently installed. It is not a system intended to be mounted and dismounted regularly.

Aerial hoop wick: long metal rod of approximately 34 cm with a ring at one end and a yellow attachment at the other end, ready to be mounted on a hoop.

NetJuggler's review of the Aerial Hoop Wick:

This wick offers a robust solution for transforming an aerial hoop into a fire apparatus. Its metal arm positions the flame far enough from the tube to create a beautiful visual effect. The fastening system is reliable but requires some time to set up. We recommend dedicating a hoop specifically to fire practice rather than assembling and disassembling wicks before each performance.

Thanks to its compatibility with tubes from 15 to 25 mm in diameter, this drill bit will also be suitable for certain manufacturing projects or other custom-made equipment.

Technical specifications:

Item sold individually.
Mass: 80 g.
Total length: 34 cm.
Distance between the tube and the flame: approximately 30 cm.
Kevlar wick: 5 cm.
Compatible with tubes with a diameter of 15 to 25 mm.
Adjustable metal collar fastening.
Rigid metal arm.
Aerial hoop not included.

For what type of practice?

For experienced aerial artists.
Compatible with aerial hoops and other tubular structures from 15 to 25 mm in diameter.
Ideal for fire shows and performances.
Suitable only for users who already have mastered the safety techniques related to fire equipment.

Assembly instructions:

The wicks must only be installed on the upper part of the hoop . Never attach them to the lower half of the apparatus, as this exposes the artist to a significant risk of burns when passing through the hoop or during tricks.

The assembly is carried out using a 7mm wrench . We advise against using a screwdriver, which may damage the screws or make tightening less precise.

Once correctly installed, the mount is very reliable. However, removing it is not particularly quick: it is not an accessory designed to be removed after each use.

Optional complementary products:

This wick is designed for use with an aerial hoop . You will also find in our selection all the fire equipment necessary for practicing and maintaining your accessories.

Warning : Aerial fireworks are a discipline reserved for experienced artists. Check that all fasteners are tight before each use and regularly inspect the condition of the Kevlar, collar, and screws. Never install fuses on the underside of the hoop.

Our advice:

To save time during rehearsals and preserve the quality of the fixings, we recommend dedicating one hoop solely to fire shows. This will prevent repeated assembly and disassembly while maintaining a perfectly reliable setup.